4 the Birds - Bird Repellent Liquid

Active Ingredient : polybutene: ..... 49%
Target Pests : Pigeons, House Sparrows, Starlings, Seagulls, Blackbirds Crows, Ravens
Not For Sale In : no restictions
Delivery : Apply with any hand or pressure spray gun which has a discharge pressure of more than 40 and less than 150 p.s.i.
Containner : 1-gal. jug.
Yeild : Ready to Use, Do not mix with water, 1-gal. treats six 3-ft. high shrubs / 1-gal. treats an average tree with a 5 inch diameter trunk after folage has fallen.

Product Label | Material Safety Data Sheet

APPLICATION DIRECTIONS:
Surface Preparation: Clean surfaces to be treated to promote adhesion of repellent. Wipe or scrape all dust, dirt, droppings, and other loose debris from surfaces. Seal porous surfaces prior to treatment by brushing on one coat shellac or a 50% solution of white glue and water, and allow to dry.

FOR INTERIOR USE:
Beams, girders, struts, supports, and other places where birds can sit and roost.

1. Prior to application, cover machinery, floors, and other important items and surfaces to prevent 4 the Birds Transparent Bird Repellent Liquid from falling on them.
2. Do not dilute 4 the Birds Transparent Bird Repellent Liquid with water or other solvents. Use as is.
3. Spray to the point of runoff. Spray in such a way that the top surfaces of beams, girders, etc. are coated. This would necessitate the operator to be level with or above the surfaces during application. Apply with any hand or pressure spray gun which has a discharge pressure of more than 40 and less than 150 p.s.i.
4. Apply product using a paint brush to surfaces that are difficult to cover by spraying.

FOR EXTERIOR USE:
Trees, bushes and vines. (Do not apply to the exterior of buildings or structures).

1. Prior to application, cover walkways and other surfaces that should be kept clean of repellent which might fall on them.
2. Apply 4 the Birds Transparent Bird Repellent Liquid to the point of runoff to the top sides of all branches in the plant to be treated that are large enough to support a bird.
3. Do not dilute 4 the Birds Transparent Bird Repellent Liquid with water or other solvents. Use as is.
4. Applications can only be made with hand or pressure spray guns which can generate sufficient pressure, up to 150 p.s.i., to move the material to the desired treatment site. Keep material agitated. Do not apply this product from aircraft.
5. It is recommended that treatment to trees, bushes, and shrubs be made in the fall or early spring when limbs are bare and easily accessible.
6. Spraying should be done when temperatures are 40° F or above. Drift can be minimized or eliminated by applying during calm conditions.
7. The amount of coverage you can expect is dependent on type of tree, bush or shrub you are treating, spray equipment, and number of and size of branches treated. Generally, one gallon of 4 the Birds Transparent Bird Repellent Liquid is sufficient to treat an average tree with a 5" diameter trunk, after foliage has fallen, or approximately six (6) three-foot high shrubs. These coverage approximations should be used only as a guideline.

Product Clean-up:
4 the Birds Transparent Bird Repellent Liquid can be removed from interior surfaces, such as metal beams, wood, laminates and painted surfaces, with mineral spirits. 4 the Birds Transparent Bird Repellent Liquid can be removed from sealed concrete, tile or stone surfaces by hosing with water if this is done within a very short time after the area was coated. Application equipment should be cleaned with mineral spirits after each use.